The Ultimate Coatings Company

CONTRACTORS:
Expand your Profitability
Become a
THERMO-SEAL™
APPROVED APPLICATOR

Available only through
approved applicators.

 
CCRC
 
CCRC
 
ARCATgreen
 
 
  Ultimate Coating home scene

Eco-Logical Coatings for the 21st Century: Thermo-Seal and Eco-Therm

 
   
Products & Technology

* Heat-reflective, breathable, thermoplastic and elastomeric architectural coatings for exterior walls, trims, and roofs.

* Fully tintable, Thermoplastic Roof Renewal System™

* Fully tintable, Elastomeric Flat and Low Slope Roof Renewal System™

All of our coating products use Rohm & Haas 100% Acrylic Resin Technology.

All of our coatings are Title 24 Compliant.

All of our opaque coatings use Infra-Red Refractive Pigments.

Roof Renewal System

THERMO-SEAL1000
Heat-reflective, cross-linking, tintable and breathable, dirt shedding, thermoplastic acrylic coating system for concrete tile, clay tile, and metal roofs. Highly solar emissive with a rating of .70 to .91 depending upon color. (70 to over 90 percent of the sun’s heat is sent off from the coating surface). Low odor, low VOC, low toxic. Ethylene glycol free.


GLAZE-COAT
Clear, acrylic polymer sealant for use over Thermo-Seal tm 1000 thermoplastic coated roof tiles. It is an additional protective sealant and a lifespan enhancer. May be utilized singly over properly cleaned tiles. Low odor, Low VOC, low toxic. Ethylene glycol free.


ECO-THERM for ROOFS
Heat reflective, tintable and breathable, high build, dirt resistant, elastomeric coating system for flat asphalt, urethane foam, elastomeric, fluid applied and concrete type roofs. Low odor, low VOC, low toxic. Ethylene glycol free.

Wall Coating Systems

THERMO-SEAL 1500
Heat-reflective, cross-linking, tintable, and breathable, dirt shedding, thermoplastic acrylic coating system for use on concrete or stucco walls, and exterior wood trim. Same emission and reflection values as our Thermo-Seal 1000 product. Low odor, low VOC, low toxic. Ethylene glycol free.

ECO-THERM ELASTOMERIC For WALLS
Heat-reflective, tintable, and breathable, dirt resistant, elastomeric coating system for concrete, stucco, plywood, and cinderblock walls. Low odor, low VOC, low toxic. Ethylene glycol free.

Depending upon the substrate, the following primers are for use with our finish coating systems above only.

EPOXY PRIMER (for THERMO-SEAL 1500)
A clear, high solids, zero solvent, water-based, epoxy primer for consolidating deteriorated or older prepared concrete and stucco.

CLEAR ROOF PRIMER (for THERMO-SEAL 1000)
An acrylic sealant primer for porous concrete, concrete tile and clay tile roofs.

BONDING PRIMER (for THERMO-SEAL 1500 and ECO-THERM)
A tintable, high grab, acrylic primer system for concrete, new stucco, plywood walls and wood trim boards.



Please email us for MSDS Sheets

Copyright 2007, Michael Biel, The Ultimate Coatings Company. All rights reserved.  www.ultimatecoatings.net

 
     
       
    Photo by Barry Povey, Melbourne,Australia
© The Ultimate Coatings Company 2007. All Rights Reserved No Portion of this site may be duplicated without express permission.
Website designed by W.A. Com Web Design